Print Page | Close Window

DEI 530T Wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145490
Printed Date: May 12, 2025 at 12:31 PM


Topic: DEI 530T Wiring

Posted By: tegguy
Subject: DEI 530T Wiring
Date Posted: June 28, 2019 at 12:50 PM

Quick question.... I'm working to install a DEI 530T module for the front windows in my 1972 Chevelle. On the switch wiring is the module looking for a 12V or ground signal or does it matter? I have the option to wire this either way and just want to ensure it works.



Replies:

Posted By: tegguy
Date Posted: June 28, 2019 at 3:28 PM
Ignore me I didn't read far enough down the manual this is set by a dip switch



Posted By: catback
Date Posted: June 28, 2019 at 7:18 PM
I know you found your answer but me personally I have my aftermarket power window motor leads resting at ground - the ground on one lead is swapped for power at the switch when I activate the window.


Print Page | Close Window