Factory Toyota Remote Start & Compustar Remote Start/Alarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145498
Printed Date: May 13, 2025 at 12:11 AM
Topic: Factory Toyota Remote Start & Compustar Remote Start/Alarm
Posted By: superbazooka
Subject: Factory Toyota Remote Start & Compustar Remote Start/Alarm
Date Posted: June 29, 2019 at 6:43 PM
I have a 2015 Toyota 4runner trd pro with factory remote start. 3x lock remote start. It sucks plus I wanted an all bells and whistles remote start/alarm so I got a Compustar cm7000 with a custom harness. I installed it today and forgot all about the factory remote start and got it all installed and set up and when I use my Compustar remote or my Drone Mobile to remote start my 4runner it works just fine.
My question is...Do I need to go through the ordeal of removing the factory remote start or is it ok to leave it in line?
Like I say, it starts up when I use the Compustar remote or Drone and just as well as the 3x on factory remotes lock button.
I just dont want to have any issues but also in the same breath..its gonna be a PITA the remove the factory remote start.
Any insight on this would be much appreciated.
Thx
Replies:
Posted By: superbazooka
Date Posted: June 29, 2019 at 6:45 PM
Also, it uses a key like I said it came with the factory 3x lock on the factory fob starts it as well as the Compustar I installed
It used a key. It is not push to start or smart key.
Posted By: catback
Date Posted: June 29, 2019 at 10:25 PM
You can leave the "factory" remote start installed it won't be an issue so long as you don't need to press the lock button 3 times for something other than the factory remote start.
|