2014 Toyota Sienna, Key Start, ABS/VSC Lights
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145510
Printed Date: April 19, 2024 at 6:48 PM
Topic: 2014 Toyota Sienna, Key Start, ABS/VSC Lights
Posted By: chev104275
Subject: 2014 Toyota Sienna, Key Start, ABS/VSC Lights
Date Posted: July 06, 2019 at 3:03 PM
I did a 2014 Toyota sienna key start remote start using a compustar 910S and a Blade Al. It's been in for a little while without issue that I know of. The customer called today saying when she starts the van using the remote start the abs/VSC lights come on. I won't see the van until next week because of the holiday just looking for some insight as to what the issue could be.
-------------
If i Can't Install it I Don't need it Joe
Replies:
Posted By: iskidoo
Date Posted: July 07, 2019 at 12:33 PM
Maybe something is no longer getting powered during remote start such as ignition 2. If key take over makes the light go out then it may indicate something like that. Just a thought.
-------------
Steve G
Posted By: chev104275
Date Posted: July 08, 2019 at 8:21 PM
That was my thought as well. Just didn't know if there was something unusual with these I don't do Toyota often.
-------------
If i Can't Install it I Don't need it Joe
Posted By: silvercivicsir
Date Posted: July 09, 2019 at 11:33 PM
probably missed the 2nd ignition.
Posted By: chev104275
Date Posted: November 24, 2019 at 1:58 PM
I finally got the van back in to take a look. I found the issue. I had added a relay off the rearm to trigger the drivers door to shut down the auto lights. The van didn’t like having the door pin triggered. I removed the relay and the van has been good for a week.
-------------
If i Can't Install it I Don't need it Joe
|