2007 Chevrolet Aveo Disarm/Lock/Unlock Wire
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145581
Printed Date: May 12, 2025 at 2:44 PM
Topic: 2007 Chevrolet Aveo Disarm/Lock/Unlock Wire
Posted By: sand33p_sidhu
Subject: 2007 Chevrolet Aveo Disarm/Lock/Unlock Wire
Date Posted: August 20, 2019 at 12:00 AM
Greetings,
I have installed a remote start using CM900 Compustar module and I have been having hard time finding lock, unlock & disarm wire. According to bulldog security wiring diagram, lock & unlock wires are supposed to be in driver's kick harness but had no luck, disarm wire is supposed to be in driver's door harness, its not there.
According to some of the other wiring diagrams, lock & unlock wire is supposed to be on the pass. kick panel and I don't see anything.
Anyone got any idea? I just want to disarm the alarm when the car starts, I would be okay without the lock & unlock. Any other idea of disarming the alarm when remote start starts the car?
Any help is appreciated!
Replies:
Posted By: i am an idiot
Date Posted: August 20, 2019 at 10:23 AM
Power Lock lt. blue - driver kick, white 20 pin plug, pin 8
Power Unlock white - driver kick, white 20 pin plug, pin 9
Lock Motor gray 5 wire driver kick, white 20 pin plug, pin 1
Driver Unlock Motor brown 5 wire driver kick, white 20 pin plug, pin 2
Passenger Unlock Motor no progressive unlock
Factory Alarm Arm factory remote only
Factory Alarm Disarm lt. grn/red or brn/blk to pur (dr door key unlock) - driver kick, white 20 pin plug, pin 12
Posted By: sand33p_sidhu
Date Posted: August 20, 2019 at 12:09 PM
Thank You for the information.
Do you know if i would need to use any relays to make lock & unlock work? According to bulldog security, it says it is a Type B lock & unlock.
Posted By: i am an idiot
Date Posted: August 20, 2019 at 4:15 PM
No relays needed. Connect your alarm's lock wire to the Lt. Blue mentioned above, and connect alarm's unlock wire to the white mentioned above.
|