Print Page | Close Window

Remote Start Installation, 2012 Chevrolet Express, Viper 5305v & DB3

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145582
Printed Date: May 12, 2025 at 9:31 PM


Topic: Remote Start Installation, 2012 Chevrolet Express, Viper 5305v & DB3

Posted By: sapiophile
Subject: Remote Start Installation, 2012 Chevrolet Express, Viper 5305v & DB3
Date Posted: August 20, 2019 at 11:38 AM

2012 Chevrolet Express van w/factory keyless entry
I am installing a Viper 5305v and a Directed DB3
The DB3 is being installed using the original wiring instructions, NOT THE RSR or RXT instructions.
I'M NOT USING THE W2W wiring, but rather the DATA wiring.
I am using the D2D cable with red end between the 5305v and DB3.
I have found which wires to hook up on the DB3, but I do not know which wires I am supposed to hook up between the Viper 5305v and the vehicle.
The DB3 interfaces with the CAN bus on the vehicle, so which wires on the remote starter (5305v) are actually supposed to be hooked up.


Print Page | Close Window