2002 Camry LE, Fuse Keeps Blowing, Keyless Entry System
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145604
Printed Date: May 11, 2025 at 11:44 PM
Topic: 2002 Camry LE, Fuse Keeps Blowing, Keyless Entry System
Posted By: jfeades1
Subject: 2002 Camry LE, Fuse Keeps Blowing, Keyless Entry System
Date Posted: August 30, 2019 at 8:09 AM
I am installing a $15 keyless entry from Amazon in a 2002 Camry LE. I am installing it as a type b negative trigger. I have everything installed according to the instructions and writing diagrams and it works but the fuse keeps blowing. I have noticed that it only happens after I've driven the car for a while. I can sit there locking and unlocking the doors and it works fine until driving the vehicle and especially if I hit the lock button on the remote while driving.
Replies:
Posted By: iskidoo
Date Posted: August 30, 2019 at 10:33 AM
Buy another one and return that one. It’s probably faulty. Another issue is those are cheaply made and the onboard relays may be flaky. I would probably use a few automotive relays to do the lock/unlock and just use the unit to trigger the external relays.
-------------
Steve G
Posted By: jfeades1
Date Posted: August 30, 2019 at 10:44 AM
Well the unit itself seems to work just fine, the problem is seemingly between the fuse and my 12 volts constant wire coming from the white-red ignition/starter. I am wondering if it has something to do with the way I tapped into the wire. I am using a yellow 10-12 gauge Posi-tap. It's just interesting it only blows when I am driving.
|