620V Electroluminescent Armed Indicator

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145606
Printed Date: May 15, 2024 at 2:04 PM

Topic: 620V Electroluminescent Armed Indicator

Posted By: itolond
Subject: 620V Electroluminescent Armed Indicator
Date Posted: August 31, 2019 at 3:20 AM

Hi forum,

I have 620V electroluminescent alarm indicator - (been in storage for some time) - alarm is not yet installed so I wanted to test the unit. It seems pretty simple - 2 wires black and red - to Red I plugged 12VDC+ and the black ground - not light - does this mean its faulty or am I over simplifying this?

Replies:

Posted By: mgoetz74
Date Posted: August 31, 2019 at 12:05 PM

those run off of 6 volts like the led, did it come with a box that step the 12 volts down to 6? if it didn't you probably fried it by hooking up to 12 volts

-------------
33 years as a installer now just a retired old guy. Favorite thing to install/topic are remote starts/car alarms. Stop using test lights!!!

Posted By: itolond
Date Posted: August 31, 2019 at 8:07 PM

yes i came with an inline epicenter 996

Print Page | Close Window