556UW in 2005 BMW X3, Do I Need Chipped Key to Start Vehicle?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145672
Printed Date: May 15, 2024 at 10:40 PM
Topic: 556UW in 2005 BMW X3, Do I Need Chipped Key to Start Vehicle?
Posted By: chem.eng
Subject: 556UW in 2005 BMW X3, Do I Need Chipped Key to Start Vehicle?
Date Posted: October 09, 2019 at 11:57 PM
I am installing a Viper 4706V into my 2005 BMW X3 (USA). Additionally, I will be installing a 556UW as a bypass module for the remote start to work properly. I will be installing the grey valet key into the module and installing the key ring the euro way by cutting into the vehicles key ring.
I was wondering with the bypass module installed will I still need a programmed (chipped) BMW key to start the vehicle? I am specifically referencing if I were to try to start the vehicle with the key and not the remote start. If I don't need a programmed (chipped) key after the bypass module is installed then I can go to my local hardware store or locksmith and have a key cut and avoid the costly dealer for a new spare key.
I appreciate any input and hope this might help others too.
Replies:
Posted By: i am an idiot
Date Posted: October 10, 2019 at 8:13 PM
According to Directechs that vehicle does not require a bypass.
|