Check Engine Light, Viper 4806v, 2017 Nissan Rouge
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145823
Printed Date: May 02, 2024 at 3:05 AM
Topic: Check Engine Light, Viper 4806v, 2017 Nissan Rouge
Posted By: mhunguyen
Subject: Check Engine Light, Viper 4806v, 2017 Nissan Rouge
Date Posted: November 30, 2019 at 1:48 PM
Hello. Been a long time member of this forum and have installed many Viper Starters with the help of this community. I am having an issue with a current viper install on a Nissan Rouge 2017 using D2D ADS ALCA. Everything seems to be working, but having an issue with the check engine light on once the rs starts.
Not sure what happened, but can’t seem to get rid of the light any help is much appreciated.
Replies:
Posted By: mhunguyen
Date Posted: November 30, 2019 at 3:42 PM
Code reads P0463.
Posted By: silvercivicsir
Date Posted: December 02, 2019 at 11:24 AM
does the check engine light come when you do a key start? If it doesn't I would recheck your wires, you have have tagged an incorrect wire.
Posted By: mhunguyen
Date Posted: December 02, 2019 at 4:09 PM
It does come on when i do a key start. So i'm wondering if some of the pins came loose when I did the wiring.
Posted By: 97f150ext
Date Posted: December 10, 2019 at 4:52 PM
I recently installed a Avital 4105 with a Fortin Evo-All and used the THAR-NIS3 T harness. I, too, experienced check engine lights and random other lights, upon starting the car after the installation. I found the green connector at the BCM was causing the issue. In my case, the T harness being used was the issue. However, if you do not have the proper connections at the green connector, you will trip the check engine light. I cannot speak to your specific issue, but maybe my problem will shed some light for you.
|