2007 Toyota Tacoma, Viper 5706, Clutch Switch

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145849
Printed Date: May 21, 2024 at 6:00 AM

Topic: 2007 Toyota Tacoma, Viper 5706, Clutch Switch

Posted By: rbxxx
Subject: 2007 Toyota Tacoma, Viper 5706, Clutch Switch
Date Posted: December 10, 2019 at 2:29 PM

I am installing a Viper 5706 and I have seen a bunch of different ways/ideas to bypass the clutch switch for the remote start, most involve a relay and a diode by sending power to the 2nd Starter. Any reason why i couldn't add my own relay that goes around the original switch (circled). In other words:
Relay...
87 Blue/Black splice,
30 Black/Yellow splice
86 +12v
85 - Starter Status(Viper 5706 or similar NEG trigger)
posted_image

thanks for the help

Replies:

Posted By: geepherder
Date Posted: December 11, 2019 at 7:13 AM

Your relay setup will work.

-------------
My ex once told me I have a perfect face for radio.

Posted By: rbxxx
Date Posted: December 11, 2019 at 7:37 AM

Thank you for the response.

Print Page | Close Window