Print Page | Close Window

Excalibur RS-370, Adding a Shock Sensor

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145868
Printed Date: May 10, 2024 at 3:15 AM


Topic: Excalibur RS-370, Adding a Shock Sensor

Posted By: 58vwragtop
Subject: Excalibur RS-370, Adding a Shock Sensor
Date Posted: December 18, 2019 at 4:53 PM

I have an Excalibur RS-370 remote start/security system that I am wanting to add a shock sensor to. Is anybody familiar with this system that can tell me how I can add a shock sensor to it?
Im installing it onto an old 1970s car. Just want to be able to use the "pitstop" mode and also have it as an alarm system. I already have some dual shock sensors form previous alarms and didn't know If I could install it on this Excalibur system.



Replies:

Posted By: i am an idiot
Date Posted: December 19, 2019 at 6:52 PM
From what I am seeing, that is just a remote start with keyless entry. No security features.




Posted By: lectricguy
Date Posted: December 21, 2019 at 1:39 PM
The Excalibur RS-x70 series remote starters can only add a shock sensor through the data port, using a special alarm add-on that Omega offers. The Omega Excalibur AU84-TDPB is the correct device to add to your system. It acts as a pass through if you are using a bypass, and has an internal shock sensor as well as alarm inputs for door/trunk. You should be able to find one online.


Good luck, I hope this helps.

-------------
Lectric Guy




Posted By: 58vwragtop
Date Posted: December 22, 2019 at 8:20 AM
That's what I thought, just wasn't totally positive. Thanks!





Print Page | Close Window