Print Page | Close Window

Starter Crank But Not Start, 2015 Lexus GX 460

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145893
Printed Date: May 13, 2024 at 9:07 AM


Topic: Starter Crank But Not Start, 2015 Lexus GX 460

Posted By: minhbach
Subject: Starter Crank But Not Start, 2015 Lexus GX 460
Date Posted: December 30, 2019 at 8:48 PM

I have installed the Viper 5704V on the Lexus GX460 2015. The starter sometimes starts Ok but sometimes it just crank and failed to start. And it supposed to tried to start 3 times but it only starts once and if it fails it shut down the remote starts. I currently set as Virtual Tach and I also increased the crank time from .6sec to .8sec. It doing the same thing. Should set to Tach and try to learn the tach signal. This is a D2D connection so I don't have to connect the tach wire.
And can someone help me again with the wiring diagrams and DBALL2 connection for this vehicle. DEI older website can't access anymore. Your help is appreciated.



Replies:

Posted By: silvercivicsir
Date Posted: January 02, 2020 at 11:09 AM
try learning the data tach from the dball.. start the car normally and press and hold the button on the antenna.. The led will flash when tach is learned.





Print Page | Close Window