Print Page | Close Window

Add Non DEI Sensors to DEI Module 5X06

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145912
Printed Date: July 16, 2025 at 6:52 AM


Topic: Add Non DEI Sensors to DEI Module 5X06

Posted By: mr98z71
Subject: Add Non DEI Sensors to DEI Module 5X06
Date Posted: January 05, 2020 at 4:09 PM

Hi, I recently purchased a viper 5706V, I am in the process of installing it, I purchased a 507M tilt sensor from dei, Wired it seperate from the 504D shock sensor harness the module came with, hooked it up to trunk pin instant trigger. Could I have hooked up the output of the 507 to one of the MUX connectors coming from the brain (currently going to the 504). I Also purchased a Omega au94tm and will be wiring it shortly, with the Omega, is it MUX compatible and can I wire it to the unused green wire coming from the shock sensor harness.



Replies:

Posted By: jvwilson101
Date Posted: January 06, 2020 at 12:58 AM
Short answer- yes and yes.


Print Page | Close Window