Door Lock Trigger Wire Colours, Viper 5806, Aftermarket Lock Controller

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145921
Printed Date: May 05, 2024 at 5:23 PM

Topic: Door Lock Trigger Wire Colours, Viper 5806, Aftermarket Lock Controller

Posted By: itolond
Subject: Door Lock Trigger Wire Colours, Viper 5806, Aftermarket Lock Controller
Date Posted: January 06, 2020 at 3:58 PM

Hi forum,

I have a Viper 5806 which has blue and green wires for the central locking output and a after market central locking controller which has brown and white - which one is the unlock and which is the lock?

Replies:

Posted By: mgoetz74
Date Posted: January 06, 2020 at 4:22 PM

are the brown and white wires positive or negative? What are those wires going to..a switch or a door lock actuator?

-------------
33 years as a installer now just a retired old guy. Favorite thing to install/topic are remote starts/car alarms. Stop using test lights!!!

Posted By: itolond
Date Posted: January 06, 2020 at 4:35 PM

positive

Posted By: itolond
Date Posted: January 06, 2020 at 10:23 PM

sorry negative trigger

Posted By: mgoetz74
Date Posted: January 08, 2020 at 1:03 PM

then you should just be able to go blue as unlock and green as lock to the switch on the door locks, just fined which wire goes to ground when you hit the lock button on the vehicle and run the green wire to that wire. Same thing for the other wire

-------------
33 years as a installer now just a retired old guy. Favorite thing to install/topic are remote starts/car alarms. Stop using test lights!!!

Print Page | Close Window