2015 Kia Sorento, Viper 4806V Runs for Minutes, Shuts Down, Restarts
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145962
Printed Date: April 28, 2024 at 6:29 PM
Topic: 2015 Kia Sorento, Viper 4806V Runs for Minutes, Shuts Down, Restarts
Posted By: 97f150ext
Subject: 2015 Kia Sorento, Viper 4806V Runs for Minutes, Shuts Down, Restarts
Date Posted: January 22, 2020 at 12:45 PM
2015 Kia Sorento with a Viper 4806V. Installed and programmed without issue. Used Bitwriter to adjust programs. Set run time to 20 minutes. Customer has expressed the vehicle runs for around 10 minutes (no exact time provided), shuts down, then restarts on its own. Vehicle hasn't been returned to me to view, but I want to cover all possibilities when it is. Anyone have experience with a Viper that matches this condition? Parking lights come on after remote start function, so I'm puzzled at the moment.
Replies:
Posted By: geepherder
Date Posted: January 22, 2020 at 1:24 PM
Are you using tach mode?
Have you tried relearning the tach with the engine already warm?
-------------
My ex once told me I have a perfect face for radio.
Posted By: 97f150ext
Date Posted: January 22, 2020 at 1:24 PM
No sooner than I posted this topic,I thought of a possible issue. I set this car on virtual tach, and the Hyundai/Kia platform doesn't match well with those. A few years ago I ran in to a similar issue, but the run time was much less, maybe 2-3 minutes. Going to run a dedicated tach signal to see if that solves the issue. Don't get many Kia's in my area, but I won't forget this if it solves the issue.
Posted By: silvercivicsir
Date Posted: January 23, 2020 at 3:35 PM
use the cam position sensor.. middle pin.
|