Print Page | Close Window

Directed 516L Door Trigger Hookup

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=145975
Printed Date: January 22, 2022 at 6:41 AM


Topic: Directed 516L Door Trigger Hookup

Posted By: xbc4000
Subject: Directed 516L Door Trigger Hookup
Date Posted: January 26, 2020 at 10:03 AM

Hello

I have a 516L voice module I am installing in a ford flex, the 516L door and trunk wires use (-) the individual flex door trigger wire is (-) and outputs (+) when the door is open, the all door trigger wire is (+) and also outputs (-) when the door is open which I guess is NC ?

I assume I can connect the (-) door trigger wire of the 516L to the (+) all door trigger wire in the flex to give (-) when the door is open ?

As for the trunk wire of the 516L it is also (-) and the flex hatch trigger is (-) which will be (+) when it's open so how would I go about converting the (+) output to (-) to give the 516L (-) when the hatch is opened ?

Would I use a SPTD relay to trigger a (-) when the (+) is activated from opening the door ?

thanks



Replies:

Posted By: cpalmer
Date Posted: January 26, 2020 at 10:23 AM
https://www.the12volt.com/relays/relaydiagram8.html




Posted By: xbc4000
Date Posted: January 26, 2020 at 10:34 AM
Wouldn't that diagram be the opposite for the hatch ?

when it is open it will give (+) but the 516L will need (-) so positive output to negative output ?

https://www.the12volt.com/relays/relaydiagram9.html




Posted By: cpalmer
Date Posted: January 26, 2020 at 10:57 AM
Yes the diagram you have in your post should work for that.





Print Page | Close Window