Hey there, I installed a Delta Pro 5005 Combo in my 99 camry. turned out pretty good. I am now adding an aftermarket trunk release as Mine just has the cable. the trunk release has a 12V fused to the switch, then wire from switch to solenoid and solenoid to ground.
The alarm manual says the Trunk output is (-).
I have 2 questions.
#1- there is a spare wire in the tunk that is not hooked up to anything is is GREEN / WHITE. can I tie into this as opposed to running new wire to the trunk?
#2 - I tried hooking this up directly and it did not work, but the switch worked fine, I guess i need a relay. Does the relay get hooked up like this?
85 - (-) trunk release output from alarm
8612V Constant fused
87 12V Constant fused
87a - connect to wire between switch and solenoid
30 - ground
Thaks a bunch!
stalt
-------------
Stalt
Please just answer question 1 of the above
Duh!!! for anyone wondering I believe the wiring for the relay I requested above should actually be
85 - (-) trunk release output from alarm
8612V Constant fused
87 12V Constant fused
87a - wire to switch
30 - wire to solenoid.
Please correct me if I am wrong!
Stalt
-------------
Stalt
The relay should be like this: Negative to Positive Relay Diagram
I would not use any SPARE wires from OEM wiring as you do not know for certain if somewhere along the line it ties into another input or output wire.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA