Avital 3100lx, How To Connect DEI 522T?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=146079
Printed Date: April 27, 2024 at 4:54 PM

Topic: Avital 3100lx, How To Connect DEI 522T?

Posted By: hsvbuff35016
Subject: Avital 3100lx, How To Connect DEI 522T?
Date Posted: March 16, 2020 at 7:22 AM

Which wire do I connect the 522t trunk release kit to so that the trunk release button on remote will open the trunk? I know that I have to use a relay to connect the trunk release to the keyless entry, if anyone could help me with the wiring for the relay I would appreciate it. This is my first post, and I searched this site for post on this topic and I didn't find any. If I missed a post about this topic please point me in its direction lol. The relay is a #8617, and I have two (one for trunk and one for parking lights, do I need one for horn?) of them on order.

Replies:

Posted By: lectricguy
Date Posted: March 16, 2020 at 7:52 AM

Wiring should be as follows:

Relay 85 and 30 to Fused +12V Constant
Relay 86 to Avital 3100 Red/White (-) Channel 2 Output
1N4001 diode from Relay 85 to 86 with Diode Band toward 85

Relay 87 to 522T Solenoid
other side of 522T Solenoid to Ground.

Hope this helps.

-------------
Lectric Guy

Posted By: hsvbuff35016
Date Posted: March 16, 2020 at 10:20 AM

Thank you!Do I need a relay for the parking lights? My car has positive parking lights.

Posted By: lectricguy
Date Posted: March 16, 2020 at 11:03 AM

Please refer to the install guide: https://www.the12volt.com/installbay/downloads.asp?srch=all&term=Avital+3100

Parking Light wire can be set for + or - output. You don't need a relay if the circuit you are connecting to draws less than 10A.

-------------
Lectric Guy