2016 Honda CR-V, PTS, Fortin EVO-One
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=146124
Printed Date: April 30, 2024 at 12:21 AM
Topic: 2016 Honda CR-V, PTS, Fortin EVO-One
Posted By: mcgrathe
Subject: 2016 Honda CR-V, PTS, Fortin EVO-One
Date Posted: April 06, 2020 at 8:33 PM
i have a 16 CRV EXL I installed a Fortin EVO-One with a Thar-One-Hon3 T harness. i have it wired with guide from fortin. Bypass programmed and decryption set. When i do a 3 X lock on OEM fob it starts but alarm goes off. I talked to their tech assistance and set the functions as they recommended but still sets off alarm. If i pull horn fuse its fine far as starting and running duration of course but not correct. Any ideas? About had it with this company. Wish id of went with the Idatalink system like i did in my 15 pilot. Anybody have same issues?
Thanks
-------------
Eric M
Replies:
Posted By: lectricguy
Date Posted: April 07, 2020 at 12:07 PM
Did you configure your evo one to unlock before remote start?
From the evo one install guide: Some vehicles must be UNLOCKED to disarm the OEM alarm before remote start. Enable option D2 using the FlashLink Manager. When this option is enabled the module will automatically UNLOCK before remote start and LOCK after the vehicle has remote started.
Have you confirmed your doors unlock before remote start (i.e, do you hear them cycle when you initiate a remote start)?
-------------
Lectric Guy
Posted By: mcgrathe
Date Posted: April 07, 2020 at 4:37 PM
yeah i have that option set and they unlock. day 2 i tried their support # ill have to try a few more settings i guess. or send back and get Idatalink. Fortin is a horrible company
thanks
-------------
Eric M
|