Python 5303P, ADS-ALCA, 2008 Ford F-150
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=146141
Printed Date: April 26, 2024 at 7:18 AM
Topic: Python 5303P, ADS-ALCA, 2008 Ford F-150
Posted By: va_timberwolf
Subject: Python 5303P, ADS-ALCA, 2008 Ford F-150
Date Posted: April 15, 2020 at 8:13 AM
so heres my situation, I have the 5303 wired in everything works BUT the remote start.
I hit button on the remote it turns the ignition on. but the transponder light starts flashing super fast.
my issue is if I put the Key in to the ignition and hit the remote start it works fine.
can someone please help??? I am at my wits end.
Replies:
Posted By: va_timberwolf
Date Posted: April 15, 2020 at 8:14 AM
Vehicle is a 2008 Ford F150 40bit encryption key.
Posted By: chev104275
Date Posted: April 15, 2020 at 9:05 AM
what are you using to bypass the transponder ?
-------------
If i Can't Install it I Don't need it Joe
Posted By: va_timberwolf
Date Posted: April 15, 2020 at 9:16 AM
IDATALINK ADS-ALCA
-------------
Reid Henderson - "THE LESSONS WE LEARN ARE WRITTEN ON THE TOMBSTONES OF OTHERS"
unknown - THE DEADLIEST WEAPON IN THE WORLD IS A MARINE & HIS RIFLE
Posted By: va_timberwolf
Date Posted: April 15, 2020 at 9:17 AM
I am also trying to use the KLON feature due to only having 1 key.
-------------
Reid Henderson - "THE LESSONS WE LEARN ARE WRITTEN ON THE TOMBSTONES OF OTHERS"
unknown - THE DEADLIEST WEAPON IN THE WORLD IS A MARINE & HIS RIFLE
Posted By: chev104275
Date Posted: April 15, 2020 at 9:40 AM
im assuming your using firmware ADS-AL(TB)-FM2 Did you go through the klon programming process successfully ?
-------------
If i Can't Install it I Don't need it Joe
Posted By: va_timberwolf
Date Posted: April 15, 2020 at 10:05 AM
an yes that is the firmware i am using. how can i upload a video here ????
-------------
Reid Henderson - "THE LESSONS WE LEARN ARE WRITTEN ON THE TOMBSTONES OF OTHERS"
unknown - THE DEADLIEST WEAPON IN THE WORLD IS A MARINE & HIS RIFLE
Posted By: chev104275
Date Posted: April 15, 2020 at 12:32 PM
I don't know how to load videos never tried. Did the klon programming go through successfully ?
-------------
If i Can't Install it I Don't need it Joe
Posted By: silvercivicsir
Date Posted: April 16, 2020 at 6:23 PM
did you select mode 1 or mode 2 for the bypass? and like the others have said, how did the key programming go?
.. off the top of my head...
1) with the power unplugged to the bypass, hold down the button, insert power, led flashes red, let go, pick either mode 1 or mode 2,
2) press and hold down button
3) insert key, and turn on, led goes off
4) press and hold programming button, led comes on, now you need to go do the klon assuming the led didn't turn green.
Posted By: va_timberwolf
Date Posted: April 17, 2020 at 4:53 PM
After a week of trouble shooting. come to find out the D2D port just isn't cutting it and wasnt turning on the bypass module.
once i went from using the D2D port. and hardwired it, I closed the door and hope for the best .. I hit the start buton on the remote and it fired right up.....
only thing i wish i could change now would be the Horn for confirm chirps cause the siren isnt loud at all.
I have it on the apron of the fender pointing downward. and its still muffled so I have the horn wired up or so i thought. but its not using horn honk AT ALL
-------------
Reid Henderson - "THE LESSONS WE LEARN ARE WRITTEN ON THE TOMBSTONES OF OTHERS"
unknown - THE DEADLIEST WEAPON IN THE WORLD IS A MARINE & HIS RIFLE
|