Python 4106, 2010 Mazda 6

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=146162
Printed Date: April 27, 2024 at 10:25 AM

Topic: Python 4106, 2010 Mazda 6

Posted By: charger47
Subject: Python 4106, 2010 Mazda 6
Date Posted: April 25, 2020 at 6:33 PM

Hi! Kind of new of this remote start anybody can help me for 2nd accessory on Mazda6 2010?

White 8-pin connector

1 RED/BLACK(+) FUSED 12V ACCESSORY/STARTER INPUT
2 PINK/BLACK(+) FLEX RELAY INPUT #87a key side (if required) of FLEX RELAY
3 PINK/WHITE(+) IGNITION 2/FLEX RELAY OUTPUT #30 of FLEX RELAY
4 RED(+) FUSED 12V IGNITION 1 INPUT
5 VIOLET(+) STARTER OUTPUT
6 ORANGE(+) ACCESSORY OUTPUT
7 RED/WHITE(+) FUSED 12V IGNITION 2 / FLEX RELAY INPUT #87
8 PINK(+) IGNITION 1 INPUT/OUTPUT

What is flex relay?
I really appreciate your help thanks.

Replies:

Posted By: kreg357
Date Posted: April 26, 2020 at 5:51 AM

The Flex Relay is a programmable ignition output. The Factory Default is IGN2 but you can change that to ACC2 or Starter2 via a programming change in Menu 3. So, yes you can use the Pink/White Flex Relay output to support your vehicles ACC2 need. Just make sure to power all three thick fused wires in that same harness. The Red/White is the supply for the Flex Relay output. Pink/Black would be unused for your application.

-------------
Soldering is fun!

Posted By: charger47
Date Posted: April 26, 2020 at 9:35 AM

Thanks i really appreciate your help