1997 Ford Mustang V6, Clifford Removal

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=146206
Printed Date: May 15, 2025 at 8:13 AM

Topic: 1997 Ford Mustang V6, Clifford Removal

Posted By: bentlogic
Subject: 1997 Ford Mustang V6, Clifford Removal
Date Posted: May 15, 2020 at 5:21 PM

I'm not even sure I'm in the right place but I'm looking to remove a older Clifford anti theft system. I'm trying to find a wiring schematic to put things back the way they were. I love pictures if there's parts pictures that would help. I'm honestly a little terrified of anything more than 2 or 3 separate wires but eh it has to be done and no money for a shop.

Replies:

Posted By: bentlogic
Date Posted: May 18, 2020 at 6:06 AM

Luckily it was a very old system and not to many wires. 4 wires and it was done. Now I have to figure out a fuel pump issue!

Print Page | Close Window