Print Page | Close Window

2008 Chevrolet Silverado, Viper 5706V, No Start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=146274
Printed Date: May 10, 2025 at 5:16 PM


Topic: 2008 Chevrolet Silverado, Viper 5706V, No Start

Posted By: robd007
Subject: 2008 Chevrolet Silverado, Viper 5706V, No Start
Date Posted: June 14, 2020 at 1:21 PM

I have this 2008 Silverado 1500 that has a Viper 5706V with a DBALL3 installed. Everything was working fine until recently. The alarm functions properly but it will not remote start. The diagnostics is giving 4 flashes remote shutdown. Any ideas on what would cause this? The dash lights do not illuminate. However the check engine light is lit very dimly. If I start the truck with the key and then remote start with the remote I am able to remove the key and the truck continues to run but other than that nothing else seems to work as far as remote starting. Any info or ideas are greatly appreciated.



Replies:

Posted By: silvercivicsir
Date Posted: June 17, 2020 at 3:25 PM
did you put in led tail lights? look for the switch, and make sure it's "on".




Print Page | Close Window