Does The 12V Wire Need To Be Constant?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=146277
Printed Date: May 01, 2024 at 1:00 PM

Topic: Does The 12V Wire Need To Be Constant?

Posted By: josephc04
Subject: Does The 12V Wire Need To Be Constant?
Date Posted: June 15, 2020 at 7:41 PM

Currently looking to install a Viper 4105 in my 2009 Ford Escape. There are two wires on the remote start harness that show they should be connected to a "(+) (30A) HIGH CURRENT 12V INPUT". Should that wire be a 12V constant, or should it only supply 12V when the ignition is in the run or on position?

Thanks in advance.

Replies:

Posted By: kreg357
Date Posted: June 15, 2020 at 7:56 PM

Must be constant. This constant power allows the system to be ON awaiting commands from the Viper 4105 remotes.

-------------
Soldering is fun!

Print Page | Close Window