Idatalink Blade, Trunk Release, 2015 Toyota Sienna, Smart Key

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=146303
Printed Date: April 27, 2024 at 10:04 AM

Topic: Idatalink Blade, Trunk Release, 2015 Toyota Sienna, Smart Key

Posted By: baby007
Subject: Idatalink Blade, Trunk Release, 2015 Toyota Sienna, Smart Key
Date Posted: June 28, 2020 at 12:21 AM

Hi, it looks like neither the idatalink ADS or BLADE supports trunk release on a Sienna 2015 PTS.
Anyone know the reason for this? Is it not feasible or they just didn't want to make it?
Can Pin13 - Violet/White (CN5-Gray) of Compustar CM7000 be hardwired for trunk releasing? Any conflict with the ADS/BLADE?

Replies:

Posted By: catback
Date Posted: June 28, 2020 at 9:58 AM

The Power Liftgate feature is supported on idatalink modules (ADS and BLADE). Minivans don't have trunks or hatches so you won't find any check marks in that column of the supported feature list.

Posted By: baby007
Date Posted: June 28, 2020 at 12:00 PM

Thank you for clearing it up.
Problem solved.

Print Page | Close Window