Clifford Intellistart 1, JDM 1990-91 Honda Integra
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=146317
Printed Date: May 11, 2024 at 4:17 AM
Topic: Clifford Intellistart 1, JDM 1990-91 Honda Integra
Posted By: nadeem mohammed
Subject: Clifford Intellistart 1, JDM 1990-91 Honda Integra
Date Posted: July 07, 2020 at 11:52 AM
Good day I'm new to this site & I'm not sure how to create my own post so i need some advice. I'm also trying to install the Intellistart 1 to a Clifford concept 470, does the gray/violet wire from Intellistart goes directly to the alarms accessory output 2? Or it needs a relay? Also there are 2 white/brown wires one is saying to connect to vehicle ignition and the other is saying the alarms ignition sense wire. Im confused what they are saying, I know my alarm immobilizer already cut the main ignition wire which is black/yellow and my other ignition which should be #2 is blue/white. I own a JDM 90-91 Honda Integra which is almost the same as 90-93 Acura Integra in the USA. Any help.
Replies:
Posted By: nadeem mohammed
Date Posted: July 12, 2020 at 1:28 PM
Ok any help, so I finally got it to remote start. I've got 2 problems now under the test procedure, it cuts off with both brake pedal and good pin when remote start but it grinds the starter when the said the safeguard will avoid this. Also it only remote starts when the alarm is off, if activated the remote won't do nothing but it says that the sensor interrupt is not needed on the concept model which is what I have Clifford concept 470 and Intellistart 1
|