DEI 516L Module Voice Messages
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=146389
Printed Date: May 02, 2024 at 5:58 PM
Topic: DEI 516L Module Voice Messages
Posted By: bw31
Subject: DEI 516L Module Voice Messages
Date Posted: August 12, 2020 at 9:58 PM
The Viper alarm on my wife's 2013 Mustang GT was installed a few years ago, along with the 508D and 516L modules. Everything works fine, except for the lack of voice messages from the 516L. It announces "Viper armed" and "Viper disarmed", but that's all. It has never said "protected by Viper, stand back", and it has said "Intrusion, door or hood access" only one time. Has anyone else seen this problem before? I'm wondering if it is simply a wire connected wrong, or if the 516L module has been bad all along. Thanks in advance for your assistance.
Replies:
Posted By: leonardaguina
Date Posted: May 21, 2021 at 10:22 AM
I know this a old post but mine is doing the same thing. was told you have to record the messages and then use the optional 3 trigger wires. i was thinkin it was a bad unit. would be nice if someone knew for sure
|