Idatalink Remote Start T-Harness Hood Pin

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=146565
Printed Date: May 09, 2025 at 3:37 PM

Topic: Idatalink Remote Start T-Harness Hood Pin

Posted By: mohpro
Subject: Idatalink Remote Start T-Harness Hood Pin
Date Posted: November 20, 2020 at 9:50 PM

If I use an idatalink remote start T harness does the remote start unit receive a signal from the vehicle's factory hood pin, or do I still have to install the hood pin that comes with the remote start unit? If I have to install the hood pin that comes with the remote start unit, does the t-harness have a wire on it for the hood pin to be connected to?

Replies:

Posted By: iskidoo
Date Posted: November 20, 2020 at 10:02 PM

Would be difficult to know without knowing what the vehicle is.

-------------
Steve G

Posted By: mohpro
Date Posted: November 20, 2020 at 10:05 PM

Basically im asking of the T-Harness has a wire on it for the hood pin that comes with the remote start

Print Page | Close Window