Activating Factory Locks with Aftermarket Fob, 2003 Acura RSX

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=146576
Printed Date: May 12, 2025 at 4:28 AM

Topic: Activating Factory Locks with Aftermarket Fob, 2003 Acura RSX

Posted By: canadian_ef
Subject: Activating Factory Locks with Aftermarket Fob, 2003 Acura RSX
Date Posted: November 25, 2020 at 10:36 AM

Hi there

I'm installing a remote start in an Acura RSX 2003 automatic

I am wondering if I'll need a relay to activate the factory locks, or if I can just tie the RS lock/unlock wires directly into the factory unlock wires. The factory wires just need a ground to activate. I am aware that a relay is needed for aftermarket actuators but am uncertain about factory components.

Thanks in advance!

Replies:

Posted By: wirewise
Date Posted: November 25, 2020 at 10:39 AM

CL or RSX?

-------------
~wirewise~ Verify all wiring with your meter before making any connections!

Posted By: canadian_ef
Date Posted: November 25, 2020 at 10:43 AM

This is for the girlfriends RSX.

Posted By: i am an idiot
Date Posted: November 27, 2020 at 11:38 AM

If the alarm has - output for the lock and unlock, simply connect directly to the vehicle wires.

Print Page | Close Window