Viper 5706V LCD Remote Won’t Display Locked Status After 30 Seconds
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=146581
Printed Date: April 27, 2024 at 1:19 PM
Topic: Viper 5706V LCD Remote Won’t Display Locked Status After 30 Seconds
Posted By: raysgsr
Subject: Viper 5706V LCD Remote Won’t Display Locked Status After 30 Seconds
Date Posted: November 27, 2020 at 9:57 PM
Hey guys, I just installed my Viper 5706V alarm/remote start myself in my 01 Acura Integra GSR. Everything works great except for one small issue that bugs me. I programmed my brain module to passive arm and lock after exiting the vehicle. The car chirps after 20 sec and then locks the doors and arms the alarm after 30 seconds - But my remote still shows unlocked symbol. If I press the lock button on the remote - Then it will display the locked symbol. Seems like the alarm transmitter is receiving signals but not outputting signals back to my remote? Also, when I request temperature check by pressing F button once then pressing F again and holding it - it displays the temp. So the 2-way transmitter works for that matter. If anyone could advise me I would appreciate it! Thank you.
|