Anti Grind/Starter Kill Diagram, Two Starter Wires
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=146795
Printed Date: April 25, 2024 at 2:02 PM
Topic: Anti Grind/Starter Kill Diagram, Two Starter Wires
Posted By: pats4life
Subject: Anti Grind/Starter Kill Diagram, Two Starter Wires
Date Posted: April 08, 2021 at 4:51 PM
can someone please tell me or show diagram on how i can wire up anti grind/starter kill if vehicle has 2 starter wire?thanks
Replies:
Posted By: davep.
Date Posted: April 12, 2021 at 12:31 AM
Use two relays, one for each starter wire.
Key side of starter wire 1 to #87a and #86 of its relay. Car-side of starter 1 wire to #30 of its relay.
Key side of starter wire 2 to #87a and #86 of its relay. Car-side of starter 2 wire to #30 of its relay.
GWA or other (-) trigger when active to both relays' #85.
Posted By: pats4life
Date Posted: April 14, 2021 at 12:46 PM
Thank you!!
Do I need diode and If I do which one do I connect them to?
Also I have 1 GWA,can I connect this wire to one of the relay #85 and use a jumper wire to the other #85 of the 2nd relay?
Thank you very much!!
Posted By: davep.
Date Posted: April 20, 2021 at 12:17 PM
”Do I need diode and If I do which one do I connect them to?”
You can use a diode for anti-spike protection for the module. Connect between 85 and 86 of either relay. Band AWAY from the GWA wire, which should go to #85.
”Also I have 1 GWA,can I connect this wire to one of the relay #85 and use a jumper wire to the other #85 of the 2nd relay?”
Yes.
“Thank you very much!!”
You're welcome.
|