Viper 3105V, Bypassing Control Center Antenna LED?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=146974
Printed Date: May 09, 2025 at 3:15 AM

Topic: Viper 3105V, Bypassing Control Center Antenna LED?

Posted By: joseph58
Subject: Viper 3105V, Bypassing Control Center Antenna LED?
Date Posted: August 12, 2021 at 1:20 PM

Hello,

I want to bypass/disable the 'all-in-one module' LED, wiring a separate LED directly to the dash.

- Viper alarm LED (red + blue)
- Antenna/valet switch/LED all-in-one module (gray+blue+black+red+green+pink)

Could not find any intermittent current on any of the 6 wires when alarm was activated.
Red wire on the all-in-one module has constant 5v.

Any help would be appreciated!

Viper 350 Plus (Model 3105V)

Replies:

Posted By: t&t tech
Date Posted: August 23, 2021 at 8:22 PM

Just go directly to the control module. Unplug the led plug from the port and you can plug an in dash led directly to the module, P.S you can get an original viper led from any alarm shop in your area, they come in red and blue.

Print Page | Close Window