bcm& kickpanel
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=14702
Printed Date: June 08, 2024 at 8:34 AM
Topic: bcm& kickpanel
Posted By: high-d
Subject: bcm& kickpanel
Date Posted: June 10, 2003 at 8:48 AM
Can anyone tell me what the BCM in a 2001 buick century looks like Because i cant locate the kick panel. Was told that the kick panel was down by the parking brake(left of drivers foot) but there is no panel there just the mechnasim for the parking brake . Thanks for the help high-d
Replies:
Posted By: high-d
Date Posted: June 10, 2003 at 9:43 AM
I found the BCM . My question now is can i unplug the connector from the BCM that has the 2 wires i am looking for RED / black and ORANGE / black without messing up the BCM in anyway.Thanks high-d
Posted By: Velocity Motors
Date Posted: June 10, 2003 at 10:10 AM
Yes you can.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: high-d
Date Posted: June 10, 2003 at 11:17 AM
Thanks again Jeff for all your help . high-d
Posted By: Velocity Motors
Date Posted: June 10, 2003 at 12:55 PM
No problemo
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: high-d
Date Posted: June 10, 2003 at 5:33 PM
One more question Jeff ,on my commando ke 30 on the wiring harnes do i have to wire up all the wires ,white for park lights,red for +12 to consntant battery ,black wire ground (which i did wire up.) The others are orange for groundedoutput when armed,gray for channel 2 output ,green for channel 3 output,violet dome light output.yellow fro igntion switched+12. Idont care bout any of those things Can i just wire up the white ,red and the black for just the keyless entry to work dont care bout the horn or any of that just the keyless entry . thanks high-d
Posted By: JWorm
Date Posted: June 11, 2003 at 6:30 PM
You should also hook up the ignition wire too. The others aren't needed.
Posted By: high-d
Date Posted: June 11, 2003 at 6:35 PM
Thanks for the info JWorm Can I get the constant +12 volts from any where or does it have to be from the ignition.If it has to come from the ignition why. Thanks again for the info high-d
Posted By: high-d
Date Posted: June 11, 2003 at 9:51 PM
Also do i need to hookup the yellow wire to the ignition for the keyless system to work
Posted By: caveman
Date Posted: June 11, 2003 at 10:20 PM
I'll just put in my two cents here.... If its only a keyless entry, then you dont necessarily need the ignition wire. It's usually only there to automatically lock the doors when you start the car. If its an alarm system, you need the ign wire so the system wont activate while the vehicle is running. Steve ------------- "Installing it yourself keeps my repair man busy"
Posted By: high-d
Date Posted: June 12, 2003 at 12:41 AM
Thanks for the response Caveman- Steve
|