2007 Ford Transit MWB Van, Viper 5806VR
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=147021
Printed Date: April 28, 2024 at 6:07 PM
Topic: 2007 Ford Transit MWB Van, Viper 5806VR
Posted By: williams0223
Subject: 2007 Ford Transit MWB Van, Viper 5806VR
Date Posted: September 05, 2021 at 3:45 AM
New to the forum and not sure where to post
I am an auto elec trying to fit a viper 5806vr alarm into a 2007 ford transit van, not a ‘connect’
I have everything working except for the remote start, I have picked up the ignition and start feeds from the ignition barrel. The dash lights up but seems to be missing a few lights eg. Glow plug, battery, engine light and won’t crank
Is there another ignition feed or start feed that needs power?
Hopefully someone can shed some light, it’s driving me crazy
Thanks
Replies:
Posted By: kreg357
Date Posted: September 05, 2021 at 8:48 AM
Did you power the Second Ignition wire? It's a Brown/Yellow (+) wire. Info below :
Second Ignition.......FUEL Brown Yellow (+) ..........@ Black 7 way at ign Pin 1
-------------
Soldering is fun!
Posted By: williams0223
Date Posted: September 05, 2021 at 3:08 PM
This transit only has 4 wires at the ignition switch
B+, acc, ign and start. All 2mm wires
Posted By: kreg357
Date Posted: September 05, 2021 at 3:16 PM
Worth a try. Here in the states we didn't get that version. That was info from Euro models.
-------------
Soldering is fun!
Posted By: williams0223
Date Posted: September 05, 2021 at 3:41 PM
Thanks mate, hopefully someone has some information on the European model
|