529t or 530t on Window Motor, Connect to Aux on Car Alarm
Printed From: the12volt.comForum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=147065
Printed Date: April 26, 2024 at 7:17 AM
Topic: 529t or 530t on Window Motor, Connect to Aux on Car Alarm
Posted By: taigraham
Subject: 529t or 530t on Window Motor, Connect to Aux on Car Alarm
Date Posted: October 02, 2021 at 5:48 PM
Hi. I'm new here but I've been reading these posts forever.
To preface this, I have looked at diagrams and installs for the last few days - probably a total of 20 hours. :-/
I want to connect my AUX button on my car alarm to drive a window motor. Currently the window is controlled by a momentary switch. I toggle it DOWN and hold for the window to open and I toggle it UP and hold it for the window to close.
I am currently trying to figure out how to wire this configuration. I'm using the Avitel 3100L and trying to decide which module to use. I have easy access to the relay that the switch runs. (In fact I think the toggle switch IS the relay??) I'm WAY better with mechanics than I am electrical and I am pretty confused, at the moment.
I know I use the orange wire from the alarm as the aux trigger - but I am a little confused if I have to hook any of the other wires to the alarm. I sort of understand the motor wiring from the module. If any one could help, I would be super grateful.
How the 529t will be wired -
The wires on the 3100 Harness -
To preface this, I have looked at diagrams and installs for the last few days - probably a total of 20 hours. :-/
I want to connect my AUX button on my car alarm to drive a window motor. Currently the window is controlled by a momentary switch. I toggle it DOWN and hold for the window to open and I toggle it UP and hold it for the window to close.
I am currently trying to figure out how to wire this configuration. I'm using the Avitel 3100L and trying to decide which module to use. I have easy access to the relay that the switch runs. (In fact I think the toggle switch IS the relay??) I'm WAY better with mechanics than I am electrical and I am pretty confused, at the moment.
I know I use the orange wire from the alarm as the aux trigger - but I am a little confused if I have to hook any of the other wires to the alarm. I sort of understand the motor wiring from the module. If any one could help, I would be super grateful.
How the 529t will be wired -
The wires on the 3100 Harness -