Extending wires for Crime Guard 745i

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=14709
Printed Date: September 08, 2025 at 2:53 PM

Topic: Extending wires for Crime Guard 745i

Posted By: MisterE
Subject: Extending wires for Crime Guard 745i
Date Posted: June 10, 2003 at 11:14 AM

I had my alarm installed by someone else. Its a Crime Guard 745i. And now that I'm getting a bigger and better sound system and seeing that the 'brain' of the alarm is just right up underneath the steering column, in plain view if you look under there. So I need to relocate it, but how would I go about extending those wires connected to it? They're in harnesses arent they? (well the plugs) Thanks

Replies:

Posted By: Velocity Motors
Date Posted: June 10, 2003 at 1:02 PM

Just cut and solder the extensions onto the wiring harness. Make sure you use the same gauge wires for the main ignition wires.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Print Page | Close Window