Print Page | Close Window

1996 GMC K3500 454, Viper 4115V Remote Start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=147131
Printed Date: March 29, 2024 at 3:37 AM


Topic: 1996 GMC K3500 454, Viper 4115V Remote Start

Posted By: ob1214
Subject: 1996 GMC K3500 454, Viper 4115V Remote Start
Date Posted: November 14, 2021 at 11:04 PM

Hello everyone! This is my first post/question here at the 12 volt. I am installing a viper 4115V in my 1996 GMC K3500 454. The brain module is a DEI 4X05.2. Looking at the wiring information off of this site https://www.the12volt.com/installbay/alarmdetail/972.html I can not find a white wire from the ignition switch in my truck, the only two wires left off the ignition switch are brown which is the ignition 3, and a pink with a white stripe. I was curious to know if the pink with white stripe is the ignition 2, and the table is marked incorrectly, but I doubt it since this is an extremely reliable source. If anyone could help me, it would mean the world.
Thank You in advance,
Owen



Replies:

Posted By: Ween
Date Posted: November 15, 2021 at 6:37 PM
Large gauge wires? I'm pretty sure the Pink/White is the Ignition 2 (powers transmission if I recall). Check with test light.
It should have power before the Pink (Ignition 1). Check the brown for being accessory power...powers wipers, radio.




Posted By: ob1214
Date Posted: November 16, 2021 at 1:09 PM
Checked with my handy dandy power probe last night and finished installing the viper system this morning. pink and white is ignition 2 and comes on before ignition 1 as you said. Brown controls the wipers and radio. Thank You for the help it was greatly appreciated. Have a great day,
Owen





Print Page | Close Window