Print Page | Close Window

2019 Nissan Sentra PTS, Remote Start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=147235
Printed Date: April 29, 2024 at 1:09 PM


Topic: 2019 Nissan Sentra PTS, Remote Start

Posted By: perezjorgejr
Subject: 2019 Nissan Sentra PTS, Remote Start
Date Posted: January 30, 2022 at 3:39 PM

Has anyone ran into an issue when installing a remote starter where when you attempt to remote start the car the display says no key found? I installed an Prestige 57TM with an FLCART. The programming sequence when through fine, but the car won't start. I had a similar issue with an 2012 Nissan Altima. I double and triple checked my wiring. The only thing that i noticed was that the instructions ask to use "keyfob1", but I don't know how to tell if the fob im using is keyfob1 and it's the customers only fob.

Thanks !

-------------
Jp



Replies:

Posted By: djdeito
Date Posted: January 30, 2022 at 10:13 PM
What does the FLCART LED status show when you attempt to remote start the car?

posted_image




Posted By: silvercivicsir
Date Posted: January 31, 2022 at 7:40 PM
are you brake lights coming before it attempts to remote start ?




Posted By: perezjorgejr
Date Posted: February 04, 2022 at 7:50 AM
He's bring the car back to me this weekend. I'll check for the status lights.. thanks!!

-------------
Jp




Posted By: perezjorgejr
Date Posted: February 04, 2022 at 7:52 AM
I'm not too sure on the brake light - I'll check it this weekend. Someone else told me that if the Nissan Fob battery is low it can cause issues while programming

-------------
Jp




Posted By: perezjorgejr
Date Posted: February 09, 2022 at 7:48 PM
So I found that their are two brake switches and I was wired to the wrong one. The customer is bringing his car in Saturday - hopefully switching to the "top" brake switch fixes the issue.

-------------
Jp





Print Page | Close Window