Print Page | Close Window

2013 Chevrolet Tahoe, Compustar FT-CMX-HC, FT-ALARMIT-KIT, ADS-THR-GM10

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=147253
Printed Date: May 09, 2025 at 8:49 AM


Topic: 2013 Chevrolet Tahoe, Compustar FT-CMX-HC, FT-ALARMIT-KIT, ADS-THR-GM10

Posted By: jdmegcoupe
Subject: 2013 Chevrolet Tahoe, Compustar FT-CMX-HC, FT-ALARMIT-KIT, ADS-THR-GM10
Date Posted: February 10, 2022 at 4:30 PM

Hello everyone, I have a Compustar FT-CMX-HC Startit, a FT-ALARM-KIT V2, a FT-KP2, and a ADS-THR-GM10 for my 2013 Chevrolet Tahoe. I am wondering if anyone can help me with what I need to wire, for the ads-thr-gm10 with CM-X-HC Startit kit, and the Alarmit kit. Do I need to wire in the wires front the CN4 20 Pin Harness and the relay for the starter wire that has the 2 yellow wires and one blue and one green, I know the siren from the alarmit kit goes to the brown wire on the cn4. So do I need to wires for the starter kill relay FT E-LOCK to the starter wires on the steering column? Do I need to wire all those wires, or does the blade and the T harness take care of it?
 Thank you


Print Page | Close Window