Compustar Remote Starter Signal, 2008 Jeep Grand Cherokee

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=147264
Printed Date: May 09, 2025 at 9:37 PM

Topic: Compustar Remote Starter Signal, 2008 Jeep Grand Cherokee

Posted By: digger22
Subject: Compustar Remote Starter Signal, 2008 Jeep Grand Cherokee
Date Posted: February 17, 2022 at 10:18 AM

hi, I have a compustar remote car starter model 2w901r-ss.It recently stopped working.when I press any functions the signal icon comes on for 2 seconds then shuts off ,I have no signal on remote.any information would help.closest dealer is about 1700 kms away.

-------------
Digger2263

Replies:

Posted By: digger22
Date Posted: February 17, 2022 at 10:19 AM

my vehicle is a 2008 jeep grand cherokee 4×4 automatic transmission 3.7 liter engine

-------------
Digger2263

Posted By: silvercivicsir
Date Posted: February 17, 2022 at 1:17 PM

try relearning the tach.. start car with key, step on brake, and remote start it park lights should flash once.

Posted By: digger22
Date Posted: February 18, 2022 at 6:38 PM

sorry did not work.as I was saying the signal bar comes on for about 2 seconds when I touch any functions on the remote then disappears.i don't think my remote is getting signal from car .also there are 3 pigtail fuses for the command star unit, what are they for?the 10 Amp fuse has no power on each side of the spade.

-------------
Digger2263

Print Page | Close Window