Print Page | Close Window

Hornet 554T and ’95 Camaro

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=14734
Printed Date: May 12, 2025 at 10:50 AM


Topic: Hornet 554T and ’95 Camaro

Posted By: D_mac05
Subject: Hornet 554T and ’95 Camaro
Date Posted: June 10, 2003 at 9:00 PM

Hey technicians/installers,

I need a definite answer.  I have a 1995  Camaro Z28, and I need to know if I need to have a bypass module or not.  It does have the chip key.  So, is the correct bypass module the DEI 555L?  Thanks for the help in advance.

Dustin




Replies:

Posted By: windowpane
Date Posted: June 10, 2003 at 9:22 PM
I think your in the same situation as I am, according to the DEI guide: https://www.drdetailshop.com/TRANSPage.htm  click on the "see DEI doc" for more info.

From that you need the vats kit, I according to that guide, need the vats kit but would like to see if i could use a module or not like the 555L or 555T because I really haven't seen the vats kit widely offered on the net and don't want to break out my multimeter to do this.





Posted By: D_mac05
Date Posted: June 10, 2003 at 9:51 PM

I hope that I can use the 555L module, because I just bought one off ebay for $24.99 new.  On that website, it does have in places, "Passkey/VATS" written.  So, anyone else think the 555L module will work?  Thanks for the input.

Dustin





Posted By: windowpane
Date Posted: June 10, 2003 at 10:03 PM
I hope it works out for you, I'm just going by what I found on the net, I started a thread with the same kind of question as yours about the same time for my own car. 

Hopefully a real installer/tech can give you good news or you'll find it works when you install it.

John





Posted By: joker5150
Date Posted: June 10, 2003 at 11:43 PM

no a 555L will not work you need to read the resistor on your key then wire up the relay as per the diagram from the dei doc ive done several of these .. dei makes vats resistor pack  ...p/n 652t with the commonly used resistor theres only 15 



-------------
I love bass





Print Page | Close Window