Print Page | Close Window

Viper 5706v Alarm Kill Switch

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=147361
Printed Date: March 28, 2024 at 12:22 PM


Topic: Viper 5706v Alarm Kill Switch

Posted By: 6ix5
Subject: Viper 5706v Alarm Kill Switch
Date Posted: May 20, 2022 at 8:18 PM

Hey guys looking for some help. I have looked into this forum MAN..... there alot of info on here. So i purchased 5706v from Ebay looks like i may have a bad internal relay. i wired everything up with ease since I have a 1965 gmc. i have change the anti grind from off to on and back nothing works. I'm still able to fire up the engine while the alarm is going off. So after a few days of looking on here for for a diagram on how to wire up a relay as a kill switch i got it to work now my issue is that when you use the remote start it also engages the kill switch. so im assuming the GWA is being used as the remote start is applied. any work around??? either from what i got going on now or even trying to get back to using the green and violet wires to work..?

Thanks

-------------
1965 GMC and 1961 GMC caryall



Replies:

Posted By: 6ix5
Date Posted: May 20, 2022 at 9:03 PM
ok does the pink wire need to be connected in order for the kill switch to work?

4 PINK/WHITE (+) IGNITION 2 / FLEX RELAY OUTPUT

-------------
1965 GMC and 1961 GMC caryall




Posted By: iskidoo
Date Posted: May 22, 2022 at 2:24 PM
Maybe you have the key side nd starter side cut wires reversed. Double check that.

-------------
Steve G




Posted By: 6ix5
Date Posted: May 22, 2022 at 7:31 PM
i double checked... i actually fixed it by running and external relay... 5 pin it kills the starter but if you do remote start it will actually work.


-------------
1965 GMC and 1961 GMC caryall





Print Page | Close Window