2008 Chevrolet Colorado, Passlock
Printed From: the12volt.comForum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=147457
Printed Date: May 09, 2025 at 6:04 AM
Topic: 2008 Chevrolet Colorado, Passlock
Posted By: Lubrano
Subject: 2008 Chevrolet Colorado, Passlock
Date Posted: September 21, 2022 at 6:40 PM
Working on a 2008 Chevy Colorado which already had a working remote start installed for many years. The ignition switch failed which contains the passlock resistor. Now the resistor for the remote start needs changing due to the different value.
What is the procedure to obtain the resistance of the passlock resistor so I can change it to match?
Thank you for your help and support.
What is the procedure to obtain the resistance of the passlock resistor so I can change it to match?
Thank you for your help and support.
Replies:
Posted By: Lubrano
Date Posted: September 22, 2022 at 4:37 AM
Think I found my answer.
