Fortin EVO One Relay Wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=147467
Printed Date: April 19, 2024 at 5:45 PM

Topic: Fortin EVO One Relay Wiring

Posted By: putszieca
Subject: Fortin EVO One Relay Wiring
Date Posted: October 05, 2022 at 12:03 PM

Hi to all fellow members 🙂🙃🙂
I am looking to install a RS using FORTIN EVO ONE along with TB-VW to a 2012 Golf Wagon Std Key Manual Transmission but as i was checking the install guide i am very confused with how the relay was wired coz why do you have to cut the 12V supply, i know it needs a 12V then a neg trigger to make it work, but this one is new to me. Any help is much appreciated. Thanks in advance 🙂🙃🙂
posted_image

-------------
FFG

Replies:

Posted By: silvercivicsir
Date Posted: October 06, 2022 at 9:57 AM

you have to cut the 12v, so you can use the - negative park light output on the EVO-one to activate the Park lights. the relay is "making" the negative output on the evo into a positive park light output

Posted By: putszieca
Date Posted: October 06, 2022 at 7:40 PM

Thanks for replying silvercivicsir. So relay pin 30 and 85 i will put jumper wire and has no connection to any wire, then it will work fine? Sorry am not good at this. Thank you again

-------------
FFG

Print Page | Close Window