Viper 5702v Swap To 5706v

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=147522
Printed Date: April 18, 2024 at 8:16 AM

Topic: Viper 5702v Swap To 5706v

Posted By: keebz489
Subject: Viper 5702v Swap To 5706v
Date Posted: December 01, 2022 at 11:52 PM

I currently have the 5702v installed in my 2017 crv , remotes are on their last leg , I can get the 5706v for less than two old remotes. The wire harness diagrams are an exact match from what I can tell , can I just swap the brains , antenna and Britannia the newer version remotes ? Or do I need to bring it in to a shop. They want $250 to switch and I feel it’s a ripoff. I’m car audio savvy , alarms not so much

Replies:

Posted By: keebz489
Date Posted: December 01, 2022 at 11:53 PM

It’s a 2017 touring , push start

Posted By: silvercivicsir
Date Posted: December 06, 2022 at 5:13 PM

you can just swap the antenna, and learn the remotes to the old module.

Posted By: keebz489
Date Posted: December 06, 2022 at 6:58 PM

I thought there were some “handshake“ issues in doing that

Posted By: silvercivicsir
Date Posted: December 07, 2022 at 2:24 PM

no issues with handshake.. the brain is pretty much the same, might be a newer firmware on the new one.. you could swap the brain if you want too, but programing the manual mode to be Off is harder than learning new remotes (in my opinion), The remotes will come preprogramed to the new viper brain.

Print Page | Close Window