Print Page | Close Window

MSD 6A Killswitch, Latching Relay?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=147592
Printed Date: April 26, 2024 at 12:17 AM


Topic: MSD 6A Killswitch, Latching Relay?

Posted By: bryaneh
Subject: MSD 6A Killswitch, Latching Relay?
Date Posted: February 03, 2023 at 7:34 PM

How do I wire a 30a relay to get it to latch non-ground when a momentary switch is held down? I would like it to be normally grounded because an MSD 6A box will not fire spark if the white wire is grounded. I would like to be able to hold a button down while starting and stay latched non-ground (12v) while the car is running, but reset to ground once I turn the car off. I don't want to have to remember to flip the switch to have security in place. I saw this post from 2003: https://www.the12volt.com/installbay/forum_posts.asp?tid=15762 but it didn't answer my question. I also looked over the relay section of this site, but wasn't sure which one to use. Thank you!



Replies:

Posted By: geepherder
Date Posted: February 04, 2023 at 8:45 AM
Try this:

posted_image

-------------
My ex once told me I have a perfect face for radio.



Posted By: bryaneh
Date Posted: February 09, 2023 at 7:15 PM
Thanks! I'll give it a shot.


Print Page | Close Window