Excalibur Remote Start, Door Unlock Output No Longer Working

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=147596
Printed Date: April 25, 2024 at 11:28 AM

Topic: Excalibur Remote Start, Door Unlock Output No Longer Working

Posted By: bat9905
Subject: Excalibur Remote Start, Door Unlock Output No Longer Working
Date Posted: February 12, 2023 at 9:52 PM

Hello everyone, installed 2 wire door lock actuators on a 1994 Toyota truck paired with a Excalibur Car Alarm/Remote Start with Color LCD 2-Way Remote & +1 Mile Range. Used relays to drive actuators
And unlock quit working. Lock still works. Tested lock output green and it goes to ground but unlock output no longer goes to ground on command. Any ideas?

-------------
bat9905

Replies:

Posted By: geepherder
Date Posted: February 13, 2023 at 5:46 AM

Depending where you got it, it may be covered under warranty. I know Crutchfield is an authorized dealer.

If you have a factory disarm output wire, you could try using that.

-------------
My ex once told me I have a perfect face for radio.

Posted By: bat9905
Date Posted: February 13, 2023 at 10:31 PM

Factory disarm wire light green/black fixed it.
Thank you

-------------
bat9905

Print Page | Close Window