Print Page | Close Window

Viper DS4 And LCD Remote Renaming Aux?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=147597
Printed Date: March 29, 2024 at 3:35 AM


Topic: Viper DS4 And LCD Remote Renaming Aux?

Posted By: jsnali13
Subject: Viper DS4 And LCD Remote Renaming Aux?
Date Posted: February 14, 2023 at 12:14 AM

Hey everyone,
I know with the bitwriter and older viper systems you were able to rename the 4 aux options on the LCD remote from the brain. I think i had a 5706.. the remote start/alarm that came with the lcd remote. I was able to rename (from a list of course) what each aux function controlled. Aux1 windows, aux2 roof, aux3 defrost...

Does anyone know if this is possible with the DS4 systems?

I did take it to an installer as i had a few wires not in use changed. I did ask the installer if he could do it as he is a viper installer and has access to programing the system but he said no.

I cant see how you are now able to change wires to different options but can not rename aux features on the remote? I currently have aux3 as my defrost, but when i use it the remote says trunk posted_image



Replies:

Posted By: silvercivicsir
Date Posted: March 01, 2023 at 11:36 AM
I think you can choice it from the remote, but the options are very limited.. try going into the menu of the remote and see what the options are




Posted By: jsnali13
Date Posted: March 05, 2023 at 1:13 PM
Unfortunately no renaming option from the remote setup menu.





Print Page | Close Window