2013 Ford F350, Viper 5704 With DBALL Remote Start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=147646
Printed Date: May 09, 2025 at 3:28 AM
Topic: 2013 Ford F350, Viper 5704 With DBALL Remote Start
Posted By: warlobster
Subject: 2013 Ford F350, Viper 5704 With DBALL Remote Start
Date Posted: April 20, 2023 at 10:17 AM
I had this alarm system installed by Best Buy in 2013 when I bought the truck. Just recently the remote start isn't working and it is triggering the factory alarm. I've been digging into it and it has a dball installed for the bypass. I see the green led flash on the dball when I try to remote start it. It immediately triggers the factory alarm.
I hooked up forscan and the reason the factory alarm is being triggered is "Ignition Tampering" event. The pitstop mode is working fine where I turn on remote start with the engine running and then remove the key.
The only change to the truck that I've done is upgrade from Sync2 to Sync3 system. I was told that shouldn't affect the factory alarm by the vendor.
Any help would be appreciated in troubleshooting the problem.
Thanks!
Eric
|