Lock And Disarm Double Pulse Diode Positioning, 2008 Honda Accord

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=147788
Printed Date: May 03, 2025 at 5:26 PM

Topic: Lock And Disarm Double Pulse Diode Positioning, 2008 Honda Accord

Posted By: jclark11
Subject: Lock And Disarm Double Pulse Diode Positioning, 2008 Honda Accord
Date Posted: November 02, 2023 at 10:07 PM

Probably is a stupid question but where do I place a diode when wiring the door unlock and disarm on a Honda Accord 2008 . These wires are brown and white and (type b) I’m runninng double pulse (-) to each. The unlocks work and what not. Just curious where I’d run the diode. I followed the directions for the 2008 in the threads pdf wiring tutorials but his wording is a bit vague. I can make a diagram of what I have if neverrasy.

Replies:

Posted By: t&t tech
Date Posted: November 26, 2023 at 7:26 AM

Two 1 Amp diodes bands facing brain side of lock an unlock wires, then wire accordingly.

-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF. PSALMS 37:5

Print Page | Close Window